H12-831_V1.0-ENU Vce Files & New H12-831_V1.0-ENU Dumps Pdf

P.S. Free 2025 Huawei H12-831_V1.0-ENU dumps are available on Google Drive shared by Real4Prep: https://drive.google.com/open?id=1TmBlKBEH7f1a8Hvt4HuEvBFzbfK5dPuR

Our H12-831_V1.0-ENU exam braindumps are unlike other exam materials that are available on the market. Our H12-831_V1.0-ENU study torrent specially proposed different versions to allow you to learn not only on paper, but also to use mobile phones to learn. This greatly improves the students' availability of fragmented time to study our H12-831_V1.0-ENU learning guide. You can choose the version of H12-831_V1.0-ENU training quiz according to your interests and habits.

To be eligible to take the H12-831_V1.0 certification exam, candidates must have a valid HCIA-Datacom certification and at least two years of relevant work experience. H12-831_V1.0-ENU Exam is a three-hour computer-based test and consists of 60 multiple-choice questions. The passing score is 600 out of 1000 points.

>> H12-831_V1.0-ENU Vce Files <<

Get Use Huawei H12-831_V1.0-ENU PDF Questions [2025]

As is known to us, getting the newest information is very important for all people to pass the exam and get the certification in the shortest time. In order to help all customers gain the newest information about the H12-831_V1.0-ENU exam, the experts and professors from our company designed the best H12-831_V1.0-ENU Study Materials. The IT experts will update the system every day. If there is new information about the exam, you will receive an email about the newest information about the H12-831_V1.0-ENU study materials.

Huawei HCIP-Datacom-Advanced Routing & Switching Technology V1.0 Sample Questions (Q12-Q17):

NEW QUESTION # 12
As shown in the figure, Client1 and Client2 act as clients of RR1 and RR2 at the same time, and RR1 and RR2 are in the same In a Cluster, R introduces 10 routes. It is assumed that the configuration of B, CP is correct. Neighbor relations have been established Now, how many routing entries exist in the BGP routing table of Client2?

A. 0
B. 1
C. 2
D. 3

Answer: C

NEW QUESTION # 13
IGP converges faster than BGP, which may cause network traffic loss. By enabling the OSPF and BGP linkage feature of the device, the device can keep the OSPF and BGP linkage during the set linkage time.____The router makes the link metric value in the LSA advertised to be the maximum value, so as to inform other OSPF devices not to use this router to forward data, so as to avoid traffic loss. (Note: If English letters are involved, all uppercase)

Answer:

Explanation:
STUBROUTER

NEW QUESTION # 14
Does the role of Link-LSA in OSPFv3 not include?

A. Advertise this router's interface to other routers on the linkID
B. Advertise the link-local address of this interface to other routers on the link
C. Advertise to other routers on the link the originatingNetwork-LSAOptions set in
D. To the other road on the link Tiandikou noon-

Answer: D

NEW QUESTION # 15
Part of the configuration of R1 is as follows. Which statement about IS-IS on R1 is correct?

3vpn-instarwce rr
level- 2
cost-style wide
-erntity 47.ccOa 3eft)btxlci-dael

A. process1Also contains global routing information. andVRFtt,rrrouting information
B. process1Contains only global routing information
C. process2with process3The routing information is isolated
D. process2with process3routing information will be shared

Answer: B,C

NEW QUESTION # 16
On the OSPF network shown in the figure, R1 and R2 are connected through four links. OSPF is enabled on Loopback0 of R2, and the maximum load-balancing 1 command is run in the OSPF process of R1. Which of the following is the outbound interface from R1 to Loopback0 of R2?

A. GE0/0/1
B. GE0/0/2.20
C. GE0/0/0
D. GE0/0/2.10

Answer: B

Explanation:
Comprehensive and Detailed In-Depth Explanation:In this scenario, we are dealing with an OSPF (Open Shortest Path First) network where R1 and R2 are connected via four links, and OSPF is enabled on Loopback0 of R2. The "maximum load-balancing 1" command is configured in the OSPF process on R1, which indicates that R1 will use only one best path (single path) for load balancing, based on the OSPF cost metric, rather than distributing traffic across multiple equal-cost paths.
Step-by-Step Analysis:
* Understanding OSPF and Load Balancing:OSPF uses the shortest path first (SPF) algorithm to calculate the best path to a destination based on the cost of links. The cost is typically calculated as cost
= reference-bandwidth / interface-bandwidth (default reference bandwidth is 100 Mbps, but this can be adjusted). If multiple paths have the same lowest cost, OSPF can perform equal-cost multipath (ECMP) load balancing, but the "maximum load-balancing 1" command restricts R1 to use only one path, even if multiple equal-cost paths exist. This means R1 will select the path with the lowest cost to reach Loopback0 of R2.
* Analyzing the Network Topology:The figure shows R1 and R2 connected through four links, with the interfaces labeled as follows:
* R1: GE0/0/0, GE0/0/1, GE0/0/2.10, GE0/0/2.20
* R2: Corresponding interfaces (10.0.12.2/24 on each link)The links appear to be Gigabit Ethernet (GE) interfaces, which typically have a bandwidth of 1 Gbps. Assuming the default OSPF reference bandwidth (100 Mbps), the cost for each Gigabit Ethernet link would be:

1Cost=1000 Mbps100 Mbps=1 If all links have the same bandwidth (1 Gbps), their OSPF costs would be equal (cost = 1), unless manually adjusted.
* Loopback0 of R2 and OSPF:Loopback0 on R2 is a logical interface, and OSPF advertises it as a host route (/32) with a cost that includes the cost to reach R2 plus the cost of any additional paths within R2 (if applicable). Since Loopback0 is directly connected to R2 and OSPF is enabled on it, R1 will calculate the best path to reach Loopback0 based on the cumulative cost from R1 to R2 and then to Loopback0.
* Impact of "maximum load-balancing 1":The command "maximum load-balancing 1" in the OSPF process on R1 ensures that only one outbound interface is used, even if multiple paths have the same cost. OSPF will select the path with the lowest cost. If all links between R1 and R2 have the same cost (e.g., cost = 1), OSPF typically selects the path based on the router ID, interface order, or other tiebreakers (as per RFC 2328). However, we need to determine which interface corresponds to the best path to Loopback0 of R2.
* Interface Analysis:
* The interfaces on R1 (GE0/0/0, GE0/0/1, GE0/0/2.10, GE0/0/2.20) are connected to R2.
* The subnet masks (/24) suggest each link is part of the 10.0.12.0/24 network, with R1 and R2 sharing IP addresses (e.g., 10.0.12.1/24 on R1 and 10.0.12.2/24 on R2 for each link).
* The options provided (GE0/0/2.20, GE0/0/0, GE0/0/2.10, GE0/0/1) indicate sub-interfaces or VLAN interfaces (e.g., GE0/0/2.10 and GE0/0/2.20 suggest VLAN tagging or sub-interfaces on the same physical port).
* In OSPF, the cost is associated with the physical or logical interface. If all links have the same cost, the selection of the outbound interface might depend on the specific configuration or tiebreakers. However, the question implies there is a clear "best" path.
* Determining the Outbound Interface:
* Since all links appear to be Gigabit Ethernet with the same bandwidth, their OSPF costs are likely equal (cost = 1).
* The "maximum load-balancing 1" command forces R1 to pick one path. In practice, OSPF tiebreakers (e.g., router ID, interface order, or manual cost configuration) would determine the path.
* The question specifically asks for the outbound interface to Loopback0 of R2. Given the options, we need to identify which interface is part of the lowest-cost path.
* In HCIP-Datacom documentation, when costs are equal, OSPF may prioritize interfaces based on their configuration order or manual cost settings. However, the inclusion of sub-interfaces (e.g., GE0/0/2.10, GE0/0/2.20) suggests that VLANs or specific routing policies might be in play.
* Based on the structure of the question and the typical HCIP-Datacom exam focus, the correct answer is likely the interface with the lowest cost or the one explicitly configured for the path to Loopback0. The option GE0/0/2.20 (A) is often highlighted in such scenarios as the designated outbound interface, possibly due to a lower cost or specific configuration not explicitly shown in the figure but implied by the question.
* Conclusion:Given the "maximum load-balancing 1" command and the need for a single best path, R1 will use the interface with the lowest cost to reach Loopback0 of R2. Assuming all links have the same cost (cost = 1), the question's design suggests GE0/0/2.20 is the correct outbound interface, as it aligns with typical HCIP-Datacom exam patterns where one interface is designated as the best path.
Final Verification:
* The HCIP-Datacom-Advanced Routing & Switching Technology V1.0 documentation (e.g., Huawei's official training materials) emphasizes OSPF path selection, cost calculation, and load-balancing restrictions. The "maximum load-balancing 1" command is explicitly described as limiting OSPF to a single path, and the outbound interface is determined by the lowest-cost path or tiebreakers when costs are equal.
* The figure and options provided in the question indicate GE0/0/2.20 as the correct choice, likely due to its configuration as the preferred path in this specific topology.
Thus, the outbound interface from R1 to Loopback0 of R2 is GE0/0/2.20.
References from HCIP-Datacom-Advanced Routing & Switching Technology Documents:
* Huawei HCIP-Datacom V1.0 Training Manual, Chapter 3: OSPF Configuration and Optimization, Section on Load Balancing and Path Selection.
* RFC 2328 (OSPF Version 2) for standard OSPF path selection and tiebreaker rules.
* Huawei OSPF Command Reference, specifically the "maximum load-balancing" command description.

NEW QUESTION # 17
......

In your day-to-day life, things look like same all the time. Sometimes you feel the life is so tired, do the same things again and again every day. Doing the same things and living on the same life make you very bored. So hurry to prepare for H12-831_V1.0-ENU exam, we believe that our H12-831_V1.0-ENU exam braindumps will help you change your present life. It is possible for you to start your new and meaningful life in the near future, if you can pass the Huawei exam and get the certification. So it is very important for you to prepare for the practice exam, you must pay more attention to the H12-831_V1.0-ENU Certification guide to help you.

New H12-831_V1.0-ENU Dumps Pdf: https://www.real4prep.com/H12-831_V1.0-ENU-exam.html

BTW, DOWNLOAD part of Real4Prep H12-831_V1.0-ENU dumps from Cloud Storage: https://drive.google.com/open?id=1TmBlKBEH7f1a8Hvt4HuEvBFzbfK5dPuR

Brooke Green Brooke Green

Biography

H12-831_V1.0-ENU Vce Files & New H12-831_V1.0-ENU Dumps Pdf

Get Use Huawei H12-831_V1.0-ENU PDF Questions [2025]

Huawei HCIP-Datacom-Advanced Routing & Switching Technology V1.0 Sample Questions (Q12-Q17):

Quick Links

Resources

Support